Wren 204




1.   To Start the System:

       A.   In the center of the podium top you will find the Crestron control panel:



      Press the desired button for the application you desire.


       B.  The Selections are:

             System Off:    Select this button to turn the system off when you finish.

             System On:     Select this button to turn the projector on.


 PC:        Select this button to show the podium computer via the  projector. 


               1. USB Thumb Drive:     To use a USB thumb drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured here:




               Laptop:          Connect your notebook computer using the VGA and Network cables

                                      provided.  Log on to your computer and ONLY THEN select the Laptop

                                      button to show via the projector


 notebook hopokup

      HDMI:          Select this button to project your HDMI source.   

                         Use the supplied HDMI connector to connect

                         your source.

hdmi labeled



         Video:            Select this button to show devices using the supplied RCA Cables.

 aux labeled



 DVD/VCR:             Select this button to show DVD’s or VHS tapes using the DVD/VCR combo via the Projector.  Use the remote control located in the Keyboard Tray to control the DVD/VCR combo.  Use the “Drive Select” button (top left; below “Power” button) to switch between DVD and tape playback.


         Auto Image:   Use this button to correctly adjust the image.