Small 111


Things to Know:



1. The Screen:  
           A.  The Screen is controlled by the picture below ( located on the podium top ) .


2. Control of All the lights:

         A.  All the room lights can be controlled by the switch located on the podium top.


3. Power Outlet:

A. A power outlet is provided for your use.


1.   To Start the System:

       A.   In the center of the podium top you will find the Crestron control panel:



 Press the desired button for the application you desire.

      B.  The Selections are:

             System Off:    Select this button to turn the system off when you  finish.

             System On:     Select this button to turn the projector on.

             PC:                  Select this button to show the podium computer via the   


         Flash Drive: To use a USB flash drive, connect to either of the USB

                                                slots on the front of the computer, or the USB cable

                                                pictured here:



            Laptop:          Connect your laptop computer using the VGA and Network cables

                                   provided.  Log on to your computer and ONLY THEN select the Laptop

                                  button to show via the projector

 notebook hookup

      HDMI:          Select this button to project your HDMI source.

                              Use the supplied HDMI connector to connect

                              your source.



        Video:            Select this button to show devices using the supplied

                               RCA Cables.


 RCA cables

Doc Camera:          Select this button to display the document camera via the projector.   The doc camera is located on the right side of the podium.




 DVD/VCR:             Select this button to show DVD’s or VHS tapes using the

                              DVD/VCR combo via the Projector.   Use the remote control

                             located in the Keyboard Tray to control the DVD/VCR combo. 


 Auto Image:   Use this button to correctly adjust the image.