Morton 203



1.   To Start the System:

       A.   In the center of the podium top you will find the Crestron control panel:




 Press the desired button for the application you desire. 

      B.  The Selections are:

            System Off:    Select this button to turn the system off when you   

                                                are finished.

            System On:     Select this button to turn the project on.     

            PC:                   Select this button to show the podium computer via the                                       projector. 


To use a USB flash drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured here:




            Laptop:          Connect your notebook computer using the VGA and

 Network cables provided.  Log on to your computer and ONLY THEN select the Laptop button to show via the projector


vga   network   


      HDMI:          Select this button to project your HDMI source.

                                                Use the supplied HDMI connector to connect

                                                your source.




        Video:            Select this button to show devices using the supplied

                                               RCA Cables.




 DVD/VCR:             Select this button to show DVD’s or VHS tapes using the DVD/VCR combo via the Projector.  Use the remote control located in the Keyboard Tray to control the DVD/VCR combo.  Use the “Drive Select” button (top left; below “Power” button) to switch between DVD and tape playback. 

         Auto Image:   Use this button to correctly adjust the image.  

         To Adjust the VOLUME:    Use the Volume  Knob on the upper right on the

                                                         Crestron Pad.