Tyler 336

podium

1. Located in the podium keyboard tray you will find a NEC Remote for use with the NEC LCD projector.

-Turn ON the Projector using the Black and Green power button located in the upper right hand corner. Please hold the power button for four seconds to turn on. When the projector comes on press one of the buttons located to the left of the power button for one of the following.

-Select Computer 1 for Podium Computer projection.

-Select Computer 2 for the Notebook Computer projection.

-Select Video for VCR, DVD and Aux projections.

-Power Off the projector by depressing the power off button twice when finished.

    2. Stand directly in front of the projector when using the remote control. The remote may not work properly if you are positioned to the side of the projector.

    3. If you have no lights on the equipment in podium, check the Rack Power Switch. It is the unit on the very top of the equipment.

    4. The Internal Computer should remain ON at all times.

    5. To Adjust the Sound:

    -To adjust All Sound, use the "Master Volume Knob" on the SCM262 Stereo Mixer, which is located in the podium, on the right-hand side of the upper shelf.

    -The first five knobs are presets for Channels. DO NOT MOVE THEM.

    6. Video Selector Switch:

    -To view Aux Video Push button 1

    -To view VCR / DVD Push button 2

    Internal Computer Projection

    1. Computer already on

    2. Turn the Projector "ON" using the remote.

    3. Set the projector to Computer 1 using the remote.

    4. Turn off the projector when finished

    Notebook Computer Projection

    1. Turn the Projector "ON" using the remote.

    2. Set the projector to Computer 2 using the remote.

    3. Connect the Notebook to the supplied VGA connector and VGA audio cable on the top of the podium. There is a network cable also there for Internet access and a power outlet.

    3. Turn on the Notebook.

    4. Turn off the projector and disconnect the Notebook when finished.

    VHS and DVD Projection

    1. Turn the Projector "On" using the remote.

    2. Set the projector to "Video" using the remote.

    3. On the Video Selector Switch, select VCR/DVD position 2.

    4. Using the VCR/DVD remote select the Input you desire "VCR/DVD" or use the VCR/DVD mode selector switch on the unit.

    5. Insert the Video or DVD and it should play, if not press "play" on the unit or the remote control.

    6. To adjust sound, use the "Master Volume Knob" on the SCM262 stereo mixer.

    7. Turn off the projector when finished.

      Optional (Auxiliary) Video Projection

      1. Turn the Projector "On" using the remote.

      2. Set the projector to "Video" using the remote.

      3. On the Video Selector Switch, select "Aux" position 1.

      4. Plug the provided video and audio cables into the equipment.

      5. Ensure that there is power to your auxiliary device by plugging your device's power cable into the power outlet provided.

      6. To adjust sound, use the "Master Volume Knob" on the SCM262 stereo mixer.

      7. When finished disconnect the equipment and turn off the projector.

        USB Connection

        1. A USB connector is provided in the Aux cables for viewing your USB media.