Tyler 322

1. Located in the podium keyboard tray you will find a NEC remote for use with the NEC LCD projector.

vt800 labeled remote

Press the Green Button located in the upper right hand corner to turn the projector ON. 

       When  the projector comes  on press one of following buttons to select your desired projection..

       "  Computer 1 "         -   podium computer projection

      "  Computer 2 "          -   notebook computer projection

      "  Video  "                    -   all video Projections ( VCR, DVD, Aux Video )

      "  Off  "                        -   press the top button on the left side of remote to turn off the projector.

 

2. Stand directly in Front or Behind the projector when using the remot

e control. The remote may not work properly if you are positioned to the side of the projector.

3. If you see no lights in the equipment when you open the podium, check the Main Rack Power Switch. It is located on the top right of the equipment rack.

4. The Internal Computer should remain ON at all times.

5. To Adjust the Sound:

-To adjust All Sound, use the "Master Volume Knob" on the SCM262 Stereo Mixer. It is located on the right-hand side of the upper shelf.

-The first five knobs are presets for Channels. DO NOT MOVE THEM.

6. Video Selector Switch:

-Aux Video Push button 1.

-VCR/DVD Video Push button 2.

Internal Computer Projection

1. Computer already on.

2. Turn the Projector ON using the remote.

3. Set projector to "Input A" using the remote.

4. Turn off the projector when finished.

Notebook Computer Projection

1. Turn the Projector On using the remote.

2. Set projector to "Input B" using the remote

3. Connect the Notebook to the supplied VGA Connector and VGA Audio cable on the side of the podium. There is also a network cable located there for Internet access, and a power outlet as well.

4. Turn on the Notebook.

5. Turn off the projector and disconnect the Notebook when finished.

VHS and DVD Projection

1. Turn the Projector On using the remote.

2. Set projector to Video using the remote.

3. On the Video Selector Switch, select Video position 2.

4. Using the VCR/DVD remote select the Input you desire "VCR/DVD" or use the VCR/DVD mode selector switch on the unit.

5. Insert the Video or DVD and it should play, if not press play on the unit or the remote control.

6. To adjust sound, use the Master Volume Knob on the SCM262 stereo mixer.

7. Turn off the projector when finished.

Optional (Auxiliary) Video Projection

  1.  

      1. Turn the Projector On using the remote.

      2. Set projector to Video using the remote.

      3. On the Video Selector Switch, select Aux position 1 .

      4. Plug the provided video and audio cables into the equipment.

      5. Ensure that there is power to your auxiliary device by plugging your device into the power outlet provided.

      6. When finished disconnect the equipment and turn off the projector.

USB Connection

    1. A USB Cable is provided in the Aux cables for viewing your USB media.