Small 235

podium

Using the System
  1. In the center of the podium top you will find the Crestron control panel. Press the desired button for the application you desire.

    crestron 
     
  2. Press System On to turn the projector on.
  3. Press Auto Image to correctly adjust the image.
  4. Press PC to display the podium computer screen via the projector.
  5. To use a USB flash drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured below.

    USB cable

  6. Press Laptop to display a laptop screen via the projector. Note: you must first connect your laptop with the VGA and network cables pictured below.

    VGA cables network
     
  7. Press HDMI to project an HDMI source with the HDMI connector.

    HDMI cable 
     
  8. Press Video to display devices with the RCA cables.

    RCA cables 
     
  9. Press DVD/VCR to show DVDs or VHS tapes with the DVD/VCR combo via the projector. Use the remote control located in the Keyboard Tray to control the DVD/VCR combo. Use the Drive Select button to switch between DVD and tape playback.
  10. Press Doc Camera to display a Document Camera via the projector. To turn the Document Camera off/on, use the Power button on the left rear of the unit.

    Document camera 
     
  11. Control volume with the Volume knob.
  12. Press System Off when you are finished.