Small 110

Things to Know:

podium

1.  Control of all the lights:

      A.  All the room lights are controled manually by the switch located on the podium top.

room lights

2.  Power Outlett:

        A.   A power outlett is provided for your use.

outlett

3.   To Turn the System On:

           A.  Touch the Crestron Touch Pad Screen.

touch p[ad 

            B.  Touching the above screen will bring up this screen.

welcome

 

           C.   Selecting Sources on the above screen will give you this screen.

sources

             D. Now you can select the desired source. Once you select the source you must press

                 The “Send To” and select the projector.  Selection will activate projector and screen.

sen to

 

                1.  Press PC for the computer in the podium.
                2,  Press  Laptop for your Notebook via VGA or HDMI connectors.
                3.  Press DVD/VCR to play a DVD or VHS tape.
                4.  Press Doc Cam 1 for the Left Document Camera. 
                5.  Press Doc Cam 2 for the right Document Camera. 
                6. Press Aux to use external equipment via RCA 

PC

            A.   When you select PC you must also select  “Send To” and select the projector. 

pc    

  Notebook Connection:

             A.   Press the laptop icon at the top of the screen and  it will display this screen. 

                   You must also   “Send To” to the projector.

laptop

 

          B.    Power on your notebook and then connect the provided cables

                  (available on the podium top, shown below) to the Notebook.

laptop cables

         C.  When finished, select another source at the top, or press the Power Off 

              button on right of the screen and follow the instructions.

DVD / VCR 

         A.  .Press the DVD/VCR icon at the top of the screen and it will display this

                screen and you must  also “Send To” the projector..

 

dvd-vcr

         B.   You must load and eject the media manually on the front panel of the DVD/VCR.

         C.   When finished press another source at the top or press the Power Off  button  

               on the top right  of the screen and follow the instructions.

 

Document Camera 1 and 2

          A.  To Use the Document  Cameras,  press the Document Camera 1 or 2 and the following

                screen will come up and You must also “Send To” the projector.

doc cams

 

           A.  To raise the Document Camera, take hold of the gray ring and lift it straight up.

doc left doc 2

 

            B.   To raise the Document Camera, take hold of the gray ring and lift it straight up. .

            C.   Adjust the Camera head to suit your needs.

            D.   To lower the Doc Camera take hold of the gray ring and pull it towards you.

            E.    When finished select another source at the top, or press the Power Off button

                   on the top  right of the screen and follow the instructions.

  

Auxiliary Input:

            A.  Press the Auxiliary icon at the top of the screen and you will see this screen

                 and You must also  “Send To” the projector

 

aux screen

 

             B.  The cables shown below are provided on top of the podium for use of

                   external equipment .

aux cables

        C.  When finished select another source at the top, or press the Power Off button

             on the top right of the screen and follow the instructions.

 

USB:

        A.  USB Connection:  To use a USB thumb drive, connect it to the USB slot  on the front of the computer

              or the USB cable pictured below.

 

usb

 

         B..  When finished select another source at the top, or press the Power Off button

                on the top  right of the screen and follow the instructions.