Departments & Offices » IT » Services » Academic Support » Classroom Technology » Classroom Guides » Morton 202
are finished.
Network cables provided. Log on to your computer and
ONLY THEN select the Laptop button to show via the projector.
Use the supplied HDMI connector to connect your source.
RCA Cables.
to control the DVD/VCR combo. Use the “Drive Select” button
(top left; below “Power” button) to switch between DVD and tape playback.
Auto Image: Use this button to correctly adjust the image.
To Adjust the VOLUME: Use the Volume Knob on the upper right on the
Morton 202
1. To Start the System:
A. In the center of the podium top you will find the Crestron control panel:
Press the desired button for the application you desire.
B. The Selections are:
System Off: Select this button to turn the system off when youare finished.
System On: Select this button to turn the project
PC: Select this button to show the podium computer via the projector.
To use a USB flash drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured here:
Laptop: Connect your notebook computer using the VGA and
Network cables provided. Log on to your computer and
ONLY THEN select the Laptop button to show via the projector.
HDMI: Select this button to project your HDMI source.
Use the supplied HDMI connector to connect your source.
Video: Select this button to show devices using the supplied
RCA Cables.
to control the DVD/VCR combo. Use the “Drive Select” button
(top left; below “Power” button) to switch between DVD and tape playback.
Auto Image: Use this button to correctly adjust the image.
To Adjust the VOLUME: Use the Volume Knob on the upper right on the