Morton 201

 

 

 

1.   To Start the System:

       A.   In the center of the podium top you will find the Crestron control
                panel:     

 

                                                                      crestron

                                                                                                               

 Press the desired button for the application you desire. 

      B.  The Selections are: 

            System Off:    Select this button to turn the system off when you   
                                                are finished.

             System On:     Select this button to turn the projector o            

             PC:                     Select this button to show the podium computer via the                                          projector.                                        

To use a USB flash drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured here:

 

                                                                 usb  

  

            Laptop:          Connect your notebook computer using the VGA and 
                                     Network cables provided.  Log on to your computer and
                                     ONLY THEN select the Laptop button to show via the projector

 

 

 

  

vganetwork

      

      HDMI:          Select this button to project your HDMI source.
                               Use the supplied HDMI connector to connect your source.

 

 

                                            hdmi

        Video:            Select this button to show devices using the supplied

                                               RCA Cables.

                                                     rca

 

           

 DVD/VCR:             Select this button to show DVD’s or VHS tapes using the
                                     combo via the Projector.  Use the remote control located in the
                                    Keyboard Tray to control the DVD/VCR combo.  Use the
                                   “Drive Select” button (top left; below “Power” button) to switch
                                    between DVD and tape playback.

          Auto Image:   Use this button to correctly adjust the image  

         To Adjust the VOLUME:    Use the Volume  Knob on the upper right on the

                                                         Crestron Pad.