1. To Start the System:
A. In the center of the podium top you will find the Crestron control panel:
Press the desired button for the application you desire.
B. The Selections are:
System Off: Select this button to turn the system off when you
System On: Select this button to turn the projector on.
PC: Select this button to show the podium computer via the projector.
To use a USB flash drive, connect to either of the USB slots on the front of the computer, or the USB cable pictured here:
Laptop: Connect your notebook computer using the VGA and
Network cables provided. Log on to your computer and ONLY THEN select the Laptop button to show via the projector.
HDMI: Select this button to project your HDMI source.
Use the supplied HDMI connector to connect
Video: Select this button to show devices using the supplied
DVD/VCR: Select this button to show DVD’s or VHS tapes using the DVD/VCR combo via the Projector. Use the remote control located in the Keyboard Tray to control the DVD/VCR combo. Use the “Drive Select” button (top left; below “Power” button) to switch between DVD and tape playback.
Auto Image: Use this button to correctly adjust the image.
To Adjust the VOLUME: Use the Volume Knob on the upper right on the
Document Camera: Select the Doc Camera button to view the document camera.