Andrews 201

 p

1.   To Start the System:

       A.   In the center of the podium top you will find the Crestron control panel:

 

crestron                                                                         

         

 Press the desired button for the application you desire. 

      B.  The Selections are:

             System Off:    Select this button to turn the system off when you   

                                                are finished.

            System On:     Select this button to turn the projector on. 

            PC:       Select this button to show the podium computer via the

                                               projector. 

 

             To use a USB flash drive, connect to either of the USB slots on the front of

                                               the computer, or the USB cable pictured here:

 

USB  

 

            Laptop:       Connect your notebook computer using the VGA and

 Network cables provided.  Log on to your computer and ONLY THEN select the Laptop button to show via the projector

vga network

         

      HDMI:          Select this button to project your HDMI source.

                             Use the supplied HDMI connector to connect your source.

 Hdmi

 

 

          Video:            Select this button to show devices using the supplied

                                               RCA Cables.

 

 

 

rca           

 

  DVD/VCR:          Select this button to show DVD’s or VHS tapes using the DVD/VCR combo via the Projector.  Use the remote control located in the Keyboard Tray to control the DVD/VCR combo.  Use the “Drive Select” button (top left; below “Power” button) to switch between DVD and tape playback.

 

 

          Auto Image:   Use this button to correctly adjust the image.

 

         To Adjust the Volume:   Use the Volume  Knob on the top right of

                                                    the Crestron Pad.